ClubEnsayos.com - Ensayos de Calidad, Tareas y Monografias
Buscar

Uav-paper


Enviado por   •  27 de Septiembre de 2011  •  677 Palabras (3 Páginas)  •  813 Visitas

Página 1 de 3

Aerodynamic Modeling of UAV Project for the Peruvian Air Force

The development of UAV systems over the past three decades has been consistent and considerably helpful in many areas such as military Intel operations, surveillance, scientific research, mining, industrial fishing, agricultural Industry, etc. Both military and the civilian world have benefited from the multiple uses a UAV system can be given. The Peruvian Government realized the necessity of developing its own UAV system, reason why the Center of Development of Projects (CEDEP) of the Peruvian Air Force (FAP) is developing the first Peruvian UAV system, with the support of the National Council of Science, Technology, and Technological Innovation (CONCYTEC). This paper summarizes the aerodynamic modeling of the first prototype of the project.

The aerodynamic modeling of the prototype went through the following phases: Conceptual Design and sketch of the design, 2-D Airfoil and Finite Wing Analysis, Design Analysis, and flight test of the first prototype based on the final design.

The conceptual design was based on the requirements for the prototype. The prototype will be a medium range, long endurance surveillance UAV for both military and civilian purposes. Following this line, the prototype has a conventional design for a long endurance aircraft, with a propeller pusher piston engine. The prototype is capable of carrying a specified payload, and will be an autonomous aircraft managed from a ground station. The autopilot uses GPS technology.

Figure 1: Fuselage Design

The Design Airfoil software was used to perform the 2-D Airfoil and Finite Wing Analysis. The software allows you to explore any kind of four, five and six digit NACA airfoils by giving you its corresponding aerodynamic coefficients. A NACA Airfoil was chosen for the prototype’s wing as it was best suited to accomplish the mission requirements. The Wing Span (b) and consequently wing size area (S) were chosen by our engineers following conventional design rules for this type of aircraft and recommendations from our aircraft manufacturer, who has over fifteen (15) years of experience building aero model aircraft.

The next step was to calculate the Stability and Control coefficients. The Advanced Aircraft Analysis (AAA) software provides these coefficients by inputting the geometry of the designed aircraft, flight conditions, and piston engine parameters in the software. These stability and Control coefficients were used to program the autopilot software, MICROPILOT, which is currently being used to fly the Pegasus prototype. As example, figure 2 below shows the lift coefficient vs. angle of attack and figure 3 shows the coefficient of drag derivative with respect to change in angle of attack versus the angle of attack.

...

Descargar como (para miembros actualizados)  txt (4.3 Kb)  
Leer 2 páginas más »
Disponible sólo en Clubensayos.com