Gention De Bases

3.131 msClassmark / calledMsClassmark / changeOfClassmark

This field contains the mobile station classmark employed by the served MS on call set-up as defined in 3GPP TS 24.008 (excerpt from 3GPP TS 24.008 as follows). Any alteration in the classmark during the connection may be recorded in the change of classmark field and will include the time at which the change took place.

The ASN.1 encoding of this field is as follows:

Classmark ::= OCTET STRING(size(3))

--

-- See Mobile station classmark 2 or 3 TS 24.008

--

3.132 mscOutgoingROUTENumber

This field indicates outgoing trunk group number or outgoing interface A group number.

The ASN.1 encoding of this field is as follows:

MscOutgoingROUTENumber ::= INTEGER(0..65535)

3.133 mscServerIndication

This field indicates whether the VT-CSI is activated in the VMSC, and it also indicates whether the TCAEML record is generated in the terminating office.

The ASN.1 encoding of this field is as follows:

mscServerIndication ::= BOOLEAN,

3.134 mscType

This field indicates the type of the MSC.

The ASN.1 encoding of this field is as follows:

MscType ::= ENUMERATED

{

interworking (0),

visited (1),

gateway (2),

transit (3)

}

3.135 ncnpFlag

This field indicates whether CDRs are generated for the new call (NC) operation or for the new party (NP) operation.

For details on the NC and NP operations, refer to 3GPP 32.250-650.

Cap4UcbNcnpType ::= ENUMERATED

{

nc-leg (0),

np-leg (1),

nonncnp-leg (2)

}

3.136 networkCallReference

This field is used to correlate call records from the originating MSC (when applicable), the GMSC, and the terminating MSC. As an optional function, it can also be used to correlate call records from the gsmSCF.

The ASN.1 encoding of this field is as follows:

NetworkCallReference ::= CallReferenceNumber

3.137 networkOperatorId

When the carriers use independent RAN and shared CN, this field is used to indicate the carrier for which the current record is generated so that the carrier can read the records correctly from the corresponding channels.

The ASN.1 encoding of this field is as follows:

NetworkOperatorId ::= OCTET STRING(SIZE(1))

3.138 newLocation

This field indicates Location area and cell after the location update.

The ASN.1 encoding of this field is as follows:

Location-info ::= SEQUENCE

{

mscNumber [1] MscNo OPTIONAL,

location-area [2] LocationAreaCode,

...