Manual De Operacion De Motorola

1 WELCOME

IPCAM is an integrated IP Camera solution based on the TCP/IP standard. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local network or the Internet. The basic function of IPCAM is to provide remote video on the IP network. High quality video images are transmitted at up to 30fps on the LAN/WAN by using MJPEG hardware compression technology. The WEB server within IPCAM supports various internet browsers including Internet Explorer. Therefore the management and maintenance of your device is simplified, by using the network to remotely configure, start-up, and upgrade the firmware of your IPCAM. You can use IPCAM to remotely monitor your home or your office. Controlling the IPCAM and managing images is simplified by using the provided web interface across the network utilising either wired or wireless connectivity.

1.1 Features

● Powerful high-speed video protocol processor ● High Definition Colour CMOS Sensor

● 300K Pixels

● IR night vision (Range: 5m)

● Optimized MJPEG video compression for transmission

● Multi-level users’ management and passwords definition

● Embedded Web Server for users interaction using IE

● Wi-Fi compliant with wireless standards IEEE 802.11b/g/n

● Supporting Dynamic IP (DDNS) and UPnP LAN and Internet (ADSL,Cable Modem)

● Motion detection activates alarm

● Supports image snapshot

● Supports multiple network protocols: HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP ● Supports WEP/WPA/WPA2 encryption

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

1

WWW.FOSCAM.COM

FI8909W User Manual

● Supports Daylight Saving Time

● Supports MSN

● Supports Gmail as sender on mail service settings

1.2 Packing List

Open the package and verify the contents with the following list:

• IPCAM × 1

• Wi-Fi Antenna×1 (only available for wireless model)

• DC Power Supply × 1

• Quick Installation Guide ×1

• CD × 1 (Includes IPCAM user manual, IP camera tool, FOSCAM Video Installation)

• Network Cable × 1

• Mounting bracket × 1 (option)

• Warranty Card × 1

NOTE: Please Contact us immediately if any parts are found to be missing or damaged.

1.3 Product views 1.3.1 Front View

Infrared LED: 5 IR LEDs

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

2

Figure 1.1

WWW.FOSCAM.COM

FI8909W User Manual

LENS: CMOS sensor with fixed focus lens. (3.6mm)

WIFI Antenna: Wireless Antenna

Microphone: Built-in microphone

Network Light: The LED will blink when plug the power

Power Light: If the power adapter works well, the light will turn on Speaker: Built-in speaker

1.3.2 Rear View

LAN: RJ-45/10-100 Base T Power: DC 5V/2A Power supply

1.3.3 Bottom View

Figure 1.2

There are up to three labels located on the body of the camera; this is an important feature of original Foscam cameras. If your camera does not have labels as shown in Figure 1.3 ,it may be a clone one. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services.

Figure 1.3

Reset button: Press and hold down the RESET BUTTON for 15 seconds. when released the IP camera will be reset back to factory default settings. You must power on the camera before

reset.

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

3

WWW.FOSCAM.COM FI8909W User Manual 1.4 Preparations before use

1.4.1 Software installation

1) Put the CD in to the CD drive of your computer. Browse the CD

2) Double click IPCamSetup.exe and install

...