User Manual Version 1.1

User Manual

Version 1.1

Date: November 2011

1 Getting started 3

1.1 Fingerprint Placement. . . . . . . . . . . . .3

1.2 Instruction for Card Swipe . . . . . . . . . . .3

1.3 Precautions . . . . . . . . . . . . . . . . .3

2 Introduction of device 4

2.1 Overview of Device Functions . . . . . . . . .4

2.2 Important Safeguards . . . . . . . . . . . .4

2.2.1 Installation Location . . . . . . . . . . . .4

2.2.2 Use of Sensor . . . . . . . . . . . . . . .4

2.2.3 Product Appearance . . . . . . . . . . .4

2.3 Using the Fingerprint Terminal . . . . . . . . . .4

2.4 Date & Time Adjustment . . . . . . . . . . . .5

2.5 Enrol Administrator / User . . . . . . . . . . .6

2.6 Password Enrolment . . . . . . . . . . . . .7

2.7 RFID Card Enrolment . . . . . . . . . . . . .7

2.8 Enrolling a Photo ID & Verifi cation . . . . . . . .8

2.8.1 Fingerprint Verifi cation with Photo . . . . . .8

2.8.2 Password & Card verifi cation (photo) . . . . 9

2.9 Manage Users . . . . . . . . . . . . . . . 10

2.9.1 Search Users . . . . . . . . . . . . . . 10

2.9.1 Delete User . . . . . . . . . . . . . . . 10

3 User Access 11

3.1 Description of User Access . . . . . . . . . . 11

3.2 Assign a User to Time Zone . . . . . . . . . . 12

3.2.1 Create a Time Zone . . . . . . . . . . . 12

3.2.2 Assign a Holiday Time Zone . . . . . . . . 13

3.2.3 Create or Edit Group settings . . . . . . . 13

3.2.4 Unlocking Combination settings . . . . . . 14

3.2.5 Change Access Control Parameters . . . . 14

3.2.6 Duress Alarm Parameters . . . . . . . . . 15

3.2.7 Defi ne a Duress Finger . . . . . . . . . . 16

3.2.8 Work Codes . . . . . . . . . . . . . . 16

4 Communications 18

4.1 Network (TCP/IP) . . . . . . . . . . . . . . 18

4.2 RS232/485 . . . . . . . . . . . . . . . . . 18

4.3 Security . . . . . . . . . . . . . . . . . . 19

Table of contents

2

4 Communications...continue 19

4.4 Wiegand . . . . . . . . . . . . . . . . . 19

4.5 Web setup . . . . . . . . . . . . . . . . 20

5 System 21

5.1 System settings . . . . . . . . . . . . . . . 21

5.2 Data Management . . . . . . . . . . . . . 21

5.2.1 System Update . . . . . . . . . . . . . 22

5.3 Keyboard . . . . . . . . . . . . . . . . . 22

5.4 Display . . . . . . . . . . . . . . . . . . 22

5.5 System Reset. . . . . . . . . . . . . . . . 23

5.6 Bell . . . . . . . . . . . . . . . . . . . 23

5.7 Miscellaneous settings . . . . . . . . . . . 24

5.8 Pendrive (USB) . . . . . . . . . . . . . . . 24

5.9 Auto Test . . . . . . . . . . . . . . . . . 24

5.10 Record . . . . . . . . . . . . . . . . . 25

5.11 System Information . . . . . . . . . . . . 25

Table of contents...continue 1

2

Summary

* Please ensure correct

placement of fi nger on

reader.

* Ensure to disconnect all

power cables, before attempting

maintenance.

1. Getting started

1.1 Fingerprint Placement

Recommended fi ngers: The index fi nger, middle fi nger or the ring fi nger; the thumb and

little fi nger are not recommended (because they are usually clumsy on the fi ngerprint

collection screen).

Please enrol and verify your fi ngerprint by using the proper fi nger placement mode. We

shall not be held accountable for any consequences arising out of the degradation in

verifi cation performance due to improper user operations. We shall reserve the right of

fi nal interpretation and revision of this document.

1.2 Instruction for Card Swipe

This device is supplied with an integrated non-contact RFID (125 MHz) card reader module.

By offering multiple verifi cation modes such as fi ngerprint, RF card and fi ngerprint +

RF card verifi cation, this device can accommodate diversifi ed user needs.

Swipe your card across the sensor area after the voice prompt and remove your card

after the device has sensed it. For the swipe area, please see 2.2.3 Product Appearance.

1.3 Precautions

Protect the device from exposure to direct sunlight or bright light, this greatly affects the

fi ngerprint collection and leads to fi ngerprint verifi cation failure.

It is recommended to use the device under a temperature of 0–50°C so as to achieve

the optimal performance. In the event of exposure of the device to the outdoors for

long periods of time, it is recommended to adopt sunshade and heat dissipation facilities

because excessively high or low temperature may slow down the device operation

and result in high false rejection rate (FRR).

When installing the device, please connect the power cable after connecting other

cables. If the device does not operate properly, be sure to shut down the power supply

before performing necessary inspections. Note that any live-line working may cause

damage to the device and the device damage arising out of live-line working falls beyond

the scope of our normal warranty.

For matters that are not covered in this document, please refer to related materials

including the installation guide, access control software user manual.

3

2. Introduction of Device

2.1 Overview of Device Functions

As an integrated fi ngerprint & access control device, our product can be connected

with either an electronic lock or an access controller. This device features simple and

fl exible operations and supports the use of administrators. The screen displays will guide

you through all the operations. It supports access control function for a security management

and supports multiple communication modes.

2.2 Important Safeguards

2.2.1 Installation Location

Do not install terminal in areas which are exposed to bright sunlight or rain, as the fi ngerprint

readers are not designed to work in those areas. Bright light will interfere with

reading of the sensor and fi ngerprint readers are not waterproof or vandal proof. It is

recommended to protect your fi ngerprint terminal with enclosure.

2.2.2 Use of Sensor

Do not abuse the fi ngerprint sensor by scratching the surface, contacting the sensor’s

surface with heat, pressing hard during placement of fi ngerprint for verifi cation. Clean

the sensor occasionally with cellophane tape to maintain the

...