Reglas de balanceo Mikrotik

Link(1) - 192.168.3.1 = WAN1

Link(2) - 192.168.4.1= WAN2

WAN-OUT = However u wanna export traffic

/ip firewall mangle

add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn

add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn

add chain=input in-interface=WAN3 action=mark-connection new-connection-mark=WAN3_conn

add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1

add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2

add chain=output connection-mark=WAN3_conn action=mark-routing new-routing-mark=to_WAN3

add chain=prerouting dst-address=192.168.60.0/24 action=accept in-interface=LAN5

add chain=prerouting dst-address=192.168.61.0/24 action=accept in-interface=LAN5

add chain=prerouting dst-address=192.168.0.0/24 action=accept in-interface=LAN5

add chain=prerouting dst-address-type=!local in-interface=LAN5 per-connection-classifier=both-addresses­-and-ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=LAN5 per-connection-classifier=both-addresses­-and-ports:2/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=LAN5 per-connection-classifier=both-addresses­-and-ports:2/3 action=mark-connection new-connection-mark=WAN3_conn passthrough=yes

add chain=prerouting connection-mark=WAN1_conn in-interface=LAN5 action=mark-routing new-routing-mark=to_WAN1

add chain=prerouting connection-mark=WAN2_conn in-interface=LAN5 action=mark-routing new-routing-mark=to_WAN2

add chain=prerouting connection-mark=WAN3_conn in-interface=LAN5 action=mark-routing new-routing-mark=to_WAN3

/ip route

add dst-address=0.0.0.0/0 gateway=192.168.60.1 routing-mark=to_WAN1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.61.1 routing-mark=to_WAN2 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.0.1 routing-mark=to_WAN3 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.60.1 distance=1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.61.1 distance=2 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.0.1 distance=2 check-gateway=ping

/ip firewall nat

add chain=srcnat out-interface=WAN1 action=masquerade

add chain=srcnat out-interface=WAN2 action=masquerade

add chain=srcnat out-interface=WAN3 action=masquerade

Basicamente con esto ya podrán realiar el balanceo de líneas adsl, repito las reglas a continuación:

Link(1)

...