Xerox Ltd

WORKCENTRE PE 220

SERVICE MANUAL

708P88337

11/05 Workcentre PE 220

Service Documentation

708P88337

November 2005

Prepared by:

Xerox Europe,

Global Knowledge & Language Services,

Enterprise Centre,

P.O. Box 17,

Bessemer Road,

Welwyn Garden City,

Hertfordshire,

AL7 1BU, England.

© Copyright 2005 by Xerox Ltd.

Xerox, and all identifying numbers used in connection with the Xerox products mentioned in this

publication are registered trademarks of Xerox. Other company trademarks are also acknowledged.

NOTICE

While every care has been taken in the preparation of this manual, no liability will be accepted by

Xerox Europe arising out of any inaccuracies or omissions.

All service documentation is supplied to Xerox external customers for informational purposes

only. Xerox service documentation is intended for use by certified, product trained service personnel

only. Xerox does not warrant or represent that it will notify or provide to such customer

any future change to this documentation. Customer performed service of equipment, or modules,

components or parts of such equipment may affect whether Xerox is responsible to fix machine

defects under the warranty offered by Xerox with respect to such equipment. You should consult

the applicable warranty for its terms regarding customer or third-party provided service.

Introduction

Workcentre PE 220 11/05 i

Introduction

Safety Precautions .................................................................................................................. iii

1. Service Call Procedures

Section Contents.................................................................................................................. 1-1

2. Repair Analysis Procedures

Section Contents.................................................................................................................. 2-1

3. Image Quality

Section Contents.................................................................................................................. 3-1

4. Repairs/Adjustments

Section Contents.................................................................................................................. 4-1

5. Parts List

Section Contents.................................................................................................................. 5-1

6. General Procedures/Information

Section Contents.................................................................................................................. 6-1

7. Wiring Data

Section Contents.................................................................................................................. 7-1

Introduction

ii 11/05 Workcentre PE 220

Page intentionally blank

Introduction

Workcentre PE 220 11/05 iii

Introduction

Precautions

In order to prevent accidents and to prevent damage to the equipment please read the precautions

listed below carefully before servicing the machine and follow them closely.

Safety Warning

1. Only to be serviced by appropriately qualified service engineers.

High voltages and lasers inside this product are dangerous. This machine should only be serviced

by a suitably trained and qualified service engineer.

2. Use only Xerox replacement parts

There are no user serviceable parts inside the machine. Do not make any unauthorized changes

or additions to the machine, these could cause the machine to malfunction and create electric

shock or fire hazards.

3. Laser Safety Statement

The machine is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1

Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product

conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous.

The laser system and machine are designed so there is never any human access to laser

radiation above a Class I level during normal operation, user maintenance, or prescribed service

condition.

Introduction

iv 11/05 Workcentre PE 220

WARNING

Never operate or service the machine with the protective cover removed from Laser/Scanner

assembly. The reflected beam, although invisible, can damage your eyes. When using this product,

these basic safety pre-cautions should always be followed to reduce risk of fire, electric

shock, and injury to persons.

Caution for safety

Toxic material

This product contains toxic materials that could cause illness if ingested.

1. If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is

toxic. Contact with the skin should be avoided, wash any splashes from eyes or skin immediately

and contact your doctor. If the liquid gets into the mouth or is swallowed see a doctor

immediately.

2. Please keep print cartridges away from children. The toner powder contained in the print cartridge

may be harmful and if swallowed you should contact a doctor.

CAUTION - INVISIBLE LASER RADIATION

WHEN THIS COVER OPEN.

DO NOT OPEN THIS COVER.

VORSICHT - UNSICHTBARE LASERSTRAHLUNG,

WENN ABDECKUNG GE FFNET.

NICHT DEM STRAHL AUSSETZEN.

ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS

D OUVERTURE. EXPOSITION DANGEREUSE

AU FAISCEAU.

ATTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI

APERTURA. EVITARE L ESPOSIZIONE AL

FASCIO.

PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE.

EVITAR EXPONERSE AL RAYO.

ADVARSEL. - USYNLIG LASERSTR LNING VED BNING, N R

SIKKERHEDSBRYDERE ER UDE AF FUNKTION.

UNDG UDSAETTELSE FOR STR LNING.

ADVARSEL. - USYNLIG LASERSTR LNING N R DEKSEL

PNES. STIRR IKKE INN I STR LEN.

UNNG EKSPONERING FOR STR LEN.

VARNING - OSYNLIG LASERSTR LNING N R DENNA DEL

R PPNAD OCH SP RREN R URKOPPLAD.

BETRAKTA EJ STR LEN. STR LEN R FARLIG.

VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA

OLET ALTTIINA N KYM TT M LLE LASERS

TEILYLLE L KATSO S TEESEEN.

Introduction

Workcentre PE 220 11/05 v

Electric Shock and Fire Safety Precautions

Failure to follow the following instructions could cause electric shock or potentially cause a fire.

1.

...