ClubEnsayos.com - Ensayos de Calidad, Tareas y Monografias
Buscar

Company Identification and Product Information


Enviado por   •  28 de Octubre de 2013  •  1.061 Palabras (5 Páginas)  •  504 Visitas

Página 1 de 5

Material Safety Data Sheet

SECTION 1: Company Identification and Product Information

PRODUCT NAME OR IDENTITY:

MI Broth - Ampoule

MANUFACTURER’S NAME:

Microclar Argentina S.A. Uruguay 830, Tigre

Buenos Aires, Argentina

EMERGENCY PHONE N°: FAX N°:

E-MAIL :

(54) 11 4731-0015 (54) 11 4512-4070

info@microclargroup.com

DATE PREPARED OR REVISED:

October 2011

SECTION 2: Composition / Information on Hazardous Ingredients

HAZARDOUS COMPONENTS CAS-N° % EG-N° HAZARD SYMBOL

N/A

N/A

N/A

N/A

N/A

This product contains no hazardous constituents, or the concentration of all chemical constituents are below the regulatory threshold limits described by Occupational Safety Health Administration Hazard Communication Standard 29 CFR 1910.1200, the Canada’s Workplace Hazardous Materials Information System (WHMIS) and the European Directive 91/155/EEC, and 93/112/EC.

SECTION 3: Health Hazard Identification

HEALTH HAZARDS:

(acute and chronic)

Information pertaining to particular dangers for man and environment.

When used and handled according to speci cations, the product does not have harmful e ects according to the information provided to us. May cause minor irritation of the eyes and skin of sensitive individuals.

SECTION 4: First Aid Measures

INGESTION: INHALATION: EYE CONTACT: SKIN CONTACT:

If swallowed, seek medical attention. Wash out mouth with water, provided person is conscious. Never give anything by mouth to an unconscious person.

If inhaled, supply fresh air or oxygen. Seek medical attention if breathing becomes di cult or labored. If breathing is di cult, give oxygen.

Rinse opened eye for at least 15 minutes under running water, lifting lower and upper eyelids occasionally. Seek medical attention if irritation develops.

Remove contaminated clothing. Immediately wash with plenty of soap and water for at least 15 minutes. Seek medical attention if irritation develops. Wash clothing before reuse.

SECTION 5: Fire and Explosion Hazard Data

FLASH POINT (Method Used):

N/A

FLAMMABLE LIMITS:

LEL – N/A, UEL – N/A

EXTINGUISHING MEDIA:

Use alcohol foam, dry chemical, or carbon dioxide. Water may be ine ective.

SPECIAL FIRE FIGHTING PROCEDURES:

Fire ghters should wear protective equipment and self-contained breathing apparatus.

UNUSUAL FIRE AND EXPLOSION HAZARDS:

During heating or in case of re, poisonous gases are produced. Fine dust dispersed in air in su cient concentrations, and in the presence of an ignition source, is a potential dust explosion hazard.

SECTION 6: Accidental Release Measures

PERSONAL PRECAUTIONS:

Wear suitable protective clothing, gloves, and eye protection. Place contaminated material in a chemical waste container.

ENVIROMENTAL PRECAUTIONS:

Prevent dispersion of material. Wipe up with damp sponge or mop.

CLEAN-UP METHODS:

Contact safety o cer if questions arise and ventilate area. Refer to Section 7 for Handling Information.

Refer to Section 8 for Person Protection Equipment. Refer to Section 13 for Disposal Information.

SECTION 7: HANDLING AND STORAGE

HANDLING:

Protect against physical damage. Ensure good ventilation / exhaustion. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Do not use if skin is cut or scratched.

STORAGE:

Keep container tightly closed, protect from light and oxygen. Storage area should be cool, dry, and away from incompatible materials at 2- 40°C.

OTHER PRECAUTIONS:

No special precautions known.

SECTION 8: Exposure Controls / Personal Protection

OES:

N/A

ACGIH TLV:

N/A

ADDITIONAL INFORMATION:

Personal Protection listed below are

...

Descargar como (para miembros actualizados) txt (7 Kb)
Leer 4 páginas más »
Disponible sólo en Clubensayos.com